Showing all 9 results
Product Video Technical Specifications SIZES WINGS & BOOM MATCHES User Manual(s) SIZES (cm) WEIGHT (kg) CARBON BOOM V2 78 0,41 CARBON BOOM V2 90 0,43 CARBON BOOM V2 97 0,46 CARBON BOOM V2 106 TBC CARBON BOOM V2 120 TBC Gallery
Technical Specifications PRESENTATION TESTS User Manual(s) Designed to work effectively even in the most critical situations, it can be triggered under load but also when the lines are slack. In some cases, the bar can get stuck in lower position against the release system during an emergency situation. The F-ONE safety release has a stopper at the top to allow enough room to activate the system in this critical situation. This stopper also makes sure your hands stay away from the bar when it’s turned at the maximum. Easy to use, it can be triggered similarly by lefthanders or right-handers. Designed with an ergonomic shape, the release handle is easy to grab to trigger the system. A flange was added to the top of the handle to improve the grip. This flange was made of soft material for the best comfort of use. From the inception the F-ONE safety release has been designed to withstand and work effectively under extreme loads, much higher than normally encountered while riding. It was designed with high resistance materials including stainless steel reinforcements and fully optimized to make it completely reliable, ready to withstand the wear and tear of an extensive use. The elastics were tested in extreme conditions and on more than 1000 release cycles in the lab. Moreover, the F-ONE safety release system has proven it is able to hold loads up to 700 kg*. Its push-away system enables to trigger the release with minimal force even under the highest loads. A reduced force of less than 5 kg is required to trigger the system when loaded at 200 kg*, while under the extreme load of 400 kg, it is still possible to release with a force of 10.21 kg*.
Product Video Technical Specifications SIZES WINGS & HANDLE MATCHS User Manual(s) SIZES (cm) WEIGHT (kg) HARD HANDLE 28 28 0,29 HARD HANDLE 30 30 0,30 HARD HANDLE 37 37 0,32 Gallery
ALUMINIUM 6063 & 6061 This aluminium alloy boasts some very good mechanical properties and can be processed in many ways while also offering a natural resistance to corrosion. Produced from an extrusion process, our aluminum profiles make the most of this homogeneous material to provide perfect stiffness both in torsion and bending. All areas in contact with other metals or carbon parts are duly isolated against galvanic reactions. Machining blocks of aluminum 6061 guarantees the maximum accuracy and preserves the mechanical properties of this higher grade of aluminum. All parts are fully anodized and stainless-steel inserts are fitted with insulating gel when fastening is required
Technical Specifications Details Details SINGLE/DOUBLE ACTION PUMP It features a single/double action speed for faster and previse inflation.
Technical Specifications DETAILS SIZES User Manual(s) There are three tuning axes to set the PLATINIUM3 BINDINGS on the board for an optimum riding position: -Angle: from 0° to 24°, you can select the foot angle that fits you the best. -Foot Position: you can slide the PLATINIUM3 BINDINGS back or forth on the board to place your feet at the right distance from the edge of the board. -Stance: all F-ONE boards offer three settings for the spacing of your feet. Three types of controls depending on the size of your feet for an amazing comfort: -Length -Width -Height A refined construction: -Dual-density pad for an optimized comfort: the edge areas are denser for a better support, while the footbed areas are softer for more comfort. -Combination of a fine anti-slip texture with a layer of thermoformed EVA to offer a perfect grip. -Assembly based on a light but solid base plate. -The PLATINIUM3 BINDINGS form a block which can be positioned and fastened easily on the boards (requiring only two screws). They can also be transported easily without losing your finely tuned setup. An ergonomic pad shape: -Optimized slope: the whole pad is canted towards the inside of the board to keep the feet perpendicular to the legs. -Dedicated grab ridge in toe area. -Specific support area under the foot arch. -Wide heel area to let you angle your foot as you feel like depending on your riding. -Lateral comfort flanges to protect your feet from the plastic straplocks. A new generation footstrap: -A thermoformed structure combined with a gel foam core provide the footstraps with an ideal comfort and support. -Super resistant neoprene Gallery
ALUMINIUM 6063 & 6061 This aluminium alloy boosts some very good mechanical properties and can be processd in many ways whie also offering a natural resistance to corrosion
Product Description The lines are made of strong Dyneema, which provides excellent strength and durability. If your lines need replacement, you can use these Top Front Lines to replace the two lines above the V-split. The length of these lines is 15.8m. Ref: 77202-8021
Technical Specifications PRESENTATION User Manual(s) Two options are available depending on the type of inserts (metal or plastic) on your board: M6 Screw Set (Ref. 77228-8001) 1x Front V-Strap 1x Back strap 1X V-Block, to place at the center of the V-strap for the screws 4X Plastic shims 6x M6 22mm screws (SST 316) 6x Metal washers (SST 316), 12mm external diameter Recommended for: POCKET, POCKET CARBON, ROCKET ASC Self-tapping Screw Set(Ref. 77228-8002) 1x Front V-Strap 1x Back strap 1x V-Block, to place at the center of the V-strap for the screws 6x Self-tapping screws 5x25mm (SUS 316) 6x Metal washers (SST 316), 14mm external diameter 4x Plastic washers (thickness = 2mm), 17mm external diameter Recommended for : ROCKET WING, ROCKET WING CARBON, ROCKET WING – S, ROCKET WING -S CARBON, POCKET CARBON CUSTOM Gallery
WhatsApp us